Product Categories

Contact Us

Haining Rishine LED Lighting Co.,Ltd

Tel: 86-573-87097218

Phone:Peter 13515831929


Add: No.27 Shijing Rd, Economic Development Zone, Haining, Zhejiang


Home > Knowledge > Content
How to distinguish the quality of LED panel light?
Sep 14, 2017

As a representative of energy-saving lamps, LED panel lamp has the characteristics of ultra thin, energy-saving, long life, high brightness, no radiation, no stroboscopic, and so on. It is very suitable for modern office and home decoration needs. But the market LED panel lights, uneven quality, it is difficult to distinguish. Which is better for the LED panel light? Mainly from the following analysis: lamp body: one body, that is, LED panel lights in a completely sealed state, the panel and fuselage as one. Such lights can be moisture-proof, waterproof, anti mosquito, and good heat dissipation, because the whole machine is a metal shell, the service life will therefore be longer. While some LED panel lights, the panel and the panel is separated from the fuselage, only the metal body is plastic, although this lamp light, but the cooling effect is not good, long time and higher temperature electricity scattered out, which leads to the decay of life is shortened. And because there are gaps in the fuselage, easy access to dust, water vapor, mosquitoes and so on, need regular cleaning. Profile: body material, but also related to the LED panel lamp service life. High quality LED panel lamp, the body generally adopts aluminum alloy oxidation resistance material, in any humid environment can use, to avoid rust, leakage, etc., does not affect its use. And some poor quality LED panel lights, the use of the iron body, very easy to rust, in a humid environment may also occur leakage of danger. To verify whether it is iron, as long as the use of magnets to try it, if it is to absorb iron, can not choose. The light guide plate: the outer part of the film is derived light illumination LED panel lights, lighting sheet material generally have composite acrylic, acrylic, acrylic and other ordinary imports, the better is the imported acrylic plate. The plate has high light guiding rate, and the brightness of the light of the lamp is even and soft, and the service life is long. Inferior LED panel lamps, lighting films are generally made of cheap recycled materials, impurities are more, light transmittance is not good, the brightness of the light is uneven, so that the lantern can hurt the eye, can not choose. Lamp: LED panel light now, generally used to patch as the light source, lamp service life is longer, the luminous effect is better. At present, the better patch is 3014 bold double gold wire patch, the processing precision, each patch of life and brightness are higher. And poor quality LED panel light, generally use single gold wire patch, and some even copper wire, brightness and service life are greatly reduced. Power supply: the ballast is the heart of LED lamp. It is directly related to the service life of the lamp. At present, a good LED panel light, generally use IC drive cross flow power supply, with short circuit, short circuit, overload and other protection functions, very safe and stable, can guarantee the life of the lamp well. Some of the lamp ballast adopts solid waterproof glue. It has good waterproof and heat dissipation effect, but there is no protection function of the former one. And inferior LED panel lamp, use inferior irrigation glue, and some even pour asphalt, can not guarantee the life of the lamp. When selecting, we must pay attention to the quality of ballast. Note: LED panel lamp, long service life, less power consumption, no radiation, small size, suitable for the living room, kitchen, bathroom and other use, more safe and environmentally friendly.

Haining Rishine LED Lighting CO.,LTD

Tel:  86-573-87097218


Add: No.27 shijing RD,Economic Development Zone,Haining,Zhejiang