Product Categories

Contact Us

Haining Rishine LED Lighting Co.,Ltd

Tel: 86-573-87097218

Phone:Peter 13515831929

Email: info@rishineled.com

Add: No.27 Shijing Rd, Economic Development Zone, Haining, Zhejiang

Knowledge

Home > Knowledge > Content
Several reasons for choosing to use LED panel lights
Jan 01, 2018

1. Low energy If a company's monthly lighting electricity for 100,000 RMB, then the use of LED, its monthly only need about 340,000 RMB, showing the effect is quite obvious.

2. The carbon dioxide emitted is about 0.62 kg per 1-degree power. With the comparison of the use of LED panel lights, can reduce the amount of carbon dioxide emissions of 0.62 kg x68%=0.42 kg, for the protection of the ecological environment plays a significant role.

3. Environmental protection LED lamp does not contain mercury (Hg), lead (PB), recyclable. From the above three points can be seen, this product is in response to the country: low-carbon, energy-saving, environmental protection call!

4. High brightness

5. Long Life ordinary fluorescent lamp service life is shorter, about 3,000-5,000 hours. and LED panel lamp service life of more than 30,000 hours (3-5 years), equivalent to 10 times times the normal lamp life.

6. Wide start LED panel light starting voltage of 100v-240v can be started. But the ordinary fluorescent lamp, the voltage is too low is not bright, cannot start normally.

7. No delay of the response time of LED lights nanosecond, turn on the light without waiting, instantaneous light, can repeatedly switch countless times. But the ordinary fluorescent lamp opens has a delay process, if frequently switches can also cause the lamp to damage.

8. No noise LED panel lights will not produce noise, quiet and comfortable.

9. No strobe ordinary fluorescent lamp uses alternating current, so it will produce 100-200 times per second strobe. The LED lamp is the direct conversion of AC power to direct current, will not produce stroboscopic phenomenon, protect the eyes, get "soft" lighting environment.

10. Material solid ordinary fluorescent lamp with the use of glass material, fragile, dangerous. And LED light is the use of advanced Engineering Plastics plus aluminum alloy, built-in semiconductor chip light-emitting, no filament, no glass bubble, not afraid of vibration, not easy to break.

11. Reduce labor costs, reduce the loss of ordinary fluorescent lamp in 3-5 years, to frequently break down a lot of roots, and the broken down to the same time to ask the electrician to change up, so that both waste of manpower and increase wastage. A small number can also accumulate large costs. and LED lamp, the service life is 3 years, that is, in this 3 years, the lamp will not be damaged, even if there is a problem, you can find manufacturers to help to solve, so that both labor costs and not increase wastage, reduce enterprise burden.