Haining Rishine LED Lighting Co.,Ltd
Add: No.27 Shijing Rd, Economic Development Zone, Haining, Zhejiang
1. LED light source Luminous efficiency
Luminous efficiency comparison: incandescent light effect in 10-15lm, halogen tungsten light efficiency of 12-24 lumens/watts, fluorescent lamps 50-90 lumens/watts, sodium 90-140 lumens/watts, most of the power consumption into heat loss.
LED light effect: can be sent to 50-200 lumens/watts, and the luminous monochrome is good, narrow spectrum, no need to filter, can be directly emitted by colored visible light.
2. LED light source less power consumption
LED single tube power 0.03-0.06 watts, using DC drive, single tube drive voltage 1.5-3.5 volts. Current 15-18 Ma reflects speed, can be operated in high-frequency, with the same lighting effect, the power consumption is the incandescent lamp one out of 10,000, fluorescent tube one-second, Japan estimates, such as the use of light efficiency than fluorescent lamps and twice times higher than the led to replace half of Japan's incandescent and fluorescent lamps, annual savings equivalent to 6 billion liters of crude oil, the same effect of a fluorescent lamp 40-watt, and the use of LEDs per branch of power only 18 watts.
3. LED light source service life is long
Incandescent lamps, fluorescent lamps, halogen tungsten lamp is the use of electronic light field radiation luminescence, filament light is easy to burn, hot deposition, light attenuation and other characteristics, and the use of LED lights small volume, light weight, epoxy resin packaging, can withstand high strength mechanical impact and vibration, not easy to break, the average life expectancy of 350,000 hours, LED lamp service life of up to 3-5 years, can greatly reduce the maintenance costs of lamps and lanterns to avoid frequent changes in the
4. Strong security and reliability
Low calorific value, no thermal radiation, Lengguang, can be safely touched, can accurately control the light and luminous angle, light color and, no glare, no mercury, sodium elements and other substances that may endanger health.
5. LED light source is favorable to environmental protection
LED for all solid-state light-emitting, impact-resistant and not easily broken, waste can be recycled, no pollution to reduce the amount of sulfur dioxide and nitrogen and other harmful gases such as carbon dioxide and other greenhouse gases to improve living environment, can be called "green light source."
- Brief Introduction Of The Character...
- Comparison Of LED Fluorescent Lamps...
- About The Selection Of LED Lamps
- The Common Causes And Treatment Met...
- Technology And Characteristics Of L...
- The Cause Of The Damage Of LED Lamps
- The Future Of LED Lamps
- The Basic Definition Of LED Panel Lamp
- The Installation Form Of LED Panel ...
- Main Performance And Characteristic...
- LED Which Is Better, The Round Pane...
- What Is The Structure Of The LED Pa...
- Guangzhou International Lighting Ex...
- LED Panel Lamp Structure?
- Advantages Of LED Panel Light
- Why Does The Hospital Choose Led Pa...