Product Categories

Contact Us

Haining Rishine LED Lighting Co.,Ltd

Tel: 86-573-87097218

Phone:Camike 15157372067

Email: info@rishineled.com

Add: No.27 Shijing Rd, Economic Development Zone, Haining, Zhejiang

News

Home > News > Content
Several Reasons For Choosing The LED Panel Light
Nov 17, 2017

Several reasons for choosing the LED panel light


1. low energy consumption, if an enterprise's monthly lighting charge is 100 thousand RMB, then choose LED, it only needs 3-4 RMB per month, showing the effect is quite obvious.

2. carbon reduction, each using 1 kwh of electricity, its emissions of carbon dioxide content is about 0.62 kilograms. Compared with the selection of LED panel lights, it can reduce the carbon dioxide emissions of 0.62 kg x 68%=0.42 kilograms, and play a great role in the protection of the ecological environment.

3. environmental protection LED lamp does not contain mercury (Hg), lead (Pb) can be recycled. From the above three points can be seen, this product is in response to the country: low carbon, energy saving, environmental protection call!

4. high brightness

5. long life ordinary fluorescent lamp has a short service life, about 3000-5000 hours. The service life of the LED panel lamp is more than 30000 hours (3-5 years), equivalent to 10 times of the ordinary lamp life.

6. wide start LED panel lamp starting voltage is 100V-240V, can start. And ordinary fluorescent lamp, the voltage is too low, the point is not bright, can not start normally.

7. no delay LED lamp response time is nanosecond, no need to wait for the lights, instant lighting, can repeatedly switch countless times. There is a delay process when the ordinary fluorescent lamp is opened, and the lamp will be damaged if the switch is frequently switched on.

8. no noise LED panel lamp does not produce noise, quiet and comfortable.

9. no strobe, the ordinary fluorescent lamp uses alternating current, so every second will produce 100-200 times of strobe. The LED light is the direct conversion of alternating current to DC, will not produce stroboscopic phenomenon, protect the eyes, access to "soft" lighting environment.

10. material is firm, ordinary daylight lamp adopts glass material, fragile, dangerous. The LED lamp is made of advanced engineering plastics and aluminum alloy, with built-in semiconductor chip luminous, no filament, no glass bubble, not afraid of vibration, not easy to break.

11., reduce labor costs, reduce the loss of ordinary fluorescent lamp in 3-5 years, a lot of root often broken, and the bad at the same time to ask the electrician to go up, so that both waste manpower and increase wastage. A small amount of money can also be accumulated. And LED lights, the service life is 3 years, that is to say, in these 3 years, lamps will not be damaged, even if there are problems, you can also find manufacturers to help solve, so that not only saves labor costs, but not increase the loss, reduce the burden on enterprises.


Haining Rishine LED Lighting CO.,LTD

Tel:  86-573-87097218-8020

Email: hao.c@geluxton.com

          xin.c@rishineled.com

          peter.zhu@rishineled.com

          camike.c@rishineled.com

Add: No.27 shijing RD,Economic Development Zone,Haining,Zhejiang